SYNTECH ADVANCE TI

API SN Semi-Synthetic

A premium quality semi-synthetic engine oil designed to provide superior engine protection and is formulated to perform even under severe conditions ensuring easy cold starts and consistent protection at high temperature


VISCOSITY GRADE: SAE 10W/40

 

SYNTECH ADVANCE T2

API SN/ILSAC GF-5 Semi-Synthetic

A superior quality semi-synthetic engine oil formulated to protect your car's engine while delivering unmateched engine performance, allowing you to unleash the full power of your engine while providing optimum fuel economy and durability


VISCOSITY GRADE: SAE 10W/30

 

SYNTECH ADVANCE T3

API SN, ACEA A3/B4-12, ACEA A3/B3-12, Semi-Synthetic

A high performance semi-synthetic engine oil that is formulated to provide outstanding engine protection for passenger cars, light trucks, sport utility vehicles and turbocharged engines


VISCOSITY GRADE: SAE 5W/30

 

SYNTECH ADVANCE T4

API SN, ACEA A3/B4-12, ACEA A3/B3-12, Semi-Synthetic

A premium quality semi-synthetic engine oil formulated with synthetic base stocks and advance high performance additives to provide excellent durability for long life performance, wear protection and low temperature performance


VISCOSITY GRADE: SAE 15W/50

 

SYNTECH ADVANCE T5

API SN, ACEA A3/B4-12, ACEA A3/B3-12, Semi-Synthetic

An ultra high performance semi-synthetic engine oil formulated with demonstrated fuel saving characteristics. It is formulated for engines requiring a fuel saving low viscosity engine oil and offer excellent engine protection for cold starting and in all driving conditions


VISCOSITY GRADE: SAE 5W/40

 

SYNTECH FORMULA F3

API SN Fully Synthetic

A fully synthetic engine oil provides better fuel economy, increased emission system durability, enhanced piston cleanliness, reduced engine sludge and improved turbocharger protection even in severe temperature conditions.

Syntech Formula F3 has been developed to exceed the international performance specification API SJ/CF and CCMC G4/G5 and PD2


VISCOSITY GRADE: 5W/40

 

SYNTECH FORMULA F4

API SN/ILSAC GF-5, Ford WSS-M2C946-A, Fully Synthetic

A superior quality fully synthetic engine oil formulated to provide optimum protection to your car engine for normal or extended drain intervals. It is formulated with special additives to perform even under severe conditions while providing optimum fuel economy


VISCOSITY GRADE: 5W/30

 

SYNTECH FORMULA F5

API SN, ACEA A1/B1-12, Ford WSS-M2C, Fully Synthetic

A superior fully synthetic engine oil with demonstrated fuel saving characteristics. It is specially formulated for engines requiring a fuel saving and low viscosity engine oil.. It also offers excellent engine protection after cold staring and in all driving conditions.


VISCOSITY GRADE: 0W/20

 

SYNTECH FORMULA F6

API SN, ACEA C3-12 MB-Approval 229.3, Fully Synthetic

An ultra high performance engine oil formulated to provide outstanding engine protection for passenger cars, light trucks, sport utility vehicles and turbocharged engines operating under severe temperatures conditions while providing optimum fuel economy


VISCOSITY GRADE: 5W/20

 

SYNTECH FORMULA F7

API SN, ACEA A3/B4-12, Approval 226, Fully Synthetic

A superior quality fully synthetic passenger car engine oil for normal and extended drain intervals. It provides superior engine protection even under severe conditions especially ensuring cold starts and consistent high temperatures


VISCOSITY GRADE: 10W/30

 

SYNTECH FORMULA F8

API SN, ACEA A3/B4-12,VW 502 00/505, Fully Synthetic

An ultra high performance fully synthetic engine oil for passenger cars with normally aspirated or turbo-charged gasoline, LPG or diesel Euro 4 & 5 engines requiring a low SAPS engine oil as well as for turbocharged engines under severe temperature conditions


VISCOSITY GRADE: 0W/16

 

MONTE CARLO T

API SN

Monte Carlo T, the latest and toughest passenger car engine oil inside the Hansford Monte Carlo range of motor oils, is a fuel saving high performance multi-grade motor oil developed for use in the latest US and European naturally aspirated and turbo-charged gasoline and diesel engines. Formulated from high viscosity base oil stocks, selected additives and a highly effective shear stable Viscosity Index Improver, it meets the latest US and European manufactures' requirement and provides optimum engine protection under the most difficult working condition.


Modern passenger car engines offer high power output, low fuel consumption, reduced exhaust emission and have smaller oil sump capacities. Together with extended service intervals, this has placed more emphasis on engine oils to provide durability, improved control of lacquer and deposit, oil oxidation, rust and corrosion and control of oil consumption. Hansford Monte Carlo T has been developed to meet and exceed these requirements and to ensure long, trouble-free engine life.


VISCOSITY GRADE: 15W/50

 

MONTE CARLO G

API SG/CD

Monte Carlo G is a super high performance, turbo-tested gasoline engine oil designed for today stop-and-go driving conditions. This engine oil is one of the most technological advance motor oil inside the Hansford Monte Carlo range as it is formulated with the most modern additive technology which include a shear stable viscosity index improver for stay-in grade performance. It provides excellent service in the latest generation of passenger cars and light commercial vehicle. Hansford Monte Carlo G is available in two viscosity grades of SAE 15W/40 and SAE 20W/50 and exceeds the American Petroleum Institute (API) Service Classification SG/CD and European CCMC, G4 and PD2

Monte Carlo G provides effective wear protection to combat the adverse effects that stop-and-go driving has on your vehicle engine especially for heavily loaded engine components and turbo-charger bearings. Blended with the super slippery agent FMX (Friction Modifiers Extra), it reduces friction between moving parts and helps fight engine deposits, sludge and reduces engine wear which in turn helps to provide longer engine life.


VISCOSITY GRADE: 20W/50

 

MONTE CARLO E

API SF/CD

Monte Carlo E is a fuel saving high performance multi-grade motor oil formulated with superior additives and quality base oil stock to meet the demand of today motoring where conditions of stop-and-go driving creates tremendous stress on the engine.

Monte Carlo E is a fully compounded oil formulated from high quality solvent neutral base oil stocks and a unique additive package which include a shear stable viscosity index improver for stay-in-grade performance and a super slippery agent FMX (Friction Modifiers Xtra). It able to reduces friction between moving parts of the engine and offer better cooling properties at high temperature for longer periods of time. It also offers greater resistance against breakdown even under sustained high revs and high stress thus giving you a longer engine life and extended overhaul periods. Reduced friction can give more mileage per gallon.


VISCOSITY GRADE: 20W/50

 

©2021 STEPHEN HANSFORD PETROLUB (M) SDN. BHD. All Rights Reserved.